Catalog Stanley Supply, Inc.


The new SPM SnapSkru MINIanchor makes only a tiny 1/4"hole, but is stronger than many larger self-drilling anchors! Itssmall 0.4" head easily hides behind the object being fastened and sits flush on the wall or ceiling. Plus, it has all of the benefits of the SP SnapSkru Regular anchor (see below).
The SnapSkru MINI SPM anchor can be used with a #6 (recommended) or a #8 screw in the same anchor!
Ideal for mounting bathroom accessories, window treatments, lighting fixtures, smoke detectors, CO detectors, picture frames, mirrors, alarms, shelving, thermostats, electric boxes, etc.

SnapSkru®
Hollow Wall – Light-Medium Loads

The TOGGLER® SnapSkru® anchor is the industry's first self-drilling drywall anchor that does NOT destroy the drywall when using the anchor. You can remove the screw and the item, leaving the anchor in the wall for re-use ... or easily remove the anchor when you choose.
The anchor's built-in "positive stop" resists overdrilling. Its unique tip does not wander on the wall ... the anchor drills itself into the drywall accurately and easily, with no need for pre-drilling.
 
When activated with a screw, the SnapSkru anchor opens with an audible "pop", locking the anchor on the wall. The drywall gypsum and its paper are kept in compression and thereby immediately reinforced.
This enables the SnapSkru anchor to:
  • be used in both walls & ceilings
  • resist vibration and shock
  • out-hold all other self-drilling drywall anchors by more than 80% in 5/8" drywall, and by more than60% in 1/2" drywall.
With a #8 x 1-1/2" screw the SP™ SnapSkru Regular anchor will hold up to:
  • 57 lbs in 3/8" drywall
  • 79 lbs in 1/2" drywall
  • 135 lbs in 5/8" drywall
With a #6 x 1-1/4" screw the SPM™ SnapSkru MINI anchor will hold up to:
  • 57 lbs in 3/8" drywall
  • 65 lbs in 1/2" drywall
  • 95 lbs in 5/8" drywall
Holding values are ultimate tensile pull with the specified screw. Industry safety standards recommend 1/4 of ultimate test load. The age, condition, and capacity of the substrate must be considered.
Holding strength for a SnapSkru self-drilling drywall anchor varies directly with the strength and condition of the wall material–and inversely with the distance of the load from the wall. See Technical Bulletin

Description

N/A SnapSkru SPM MINI Anchors

Included Screw Size

N/A 100 #6 x 1-1/2 Combo Screws

Screw Size Range

N/A #6 - #8

Drywall Thickness

N/A 3/8" - 5/8"

Box Qty.

N/A 100