Catalog Stanley Supply, Inc.

Redhead A-7P adhesive anchor system in a handy 10 ounce size. This kit comes with the adhesive, nozzle and a adapter that allows you to dispense with a standard caulk gun. Extra nozzles are available 10 Fluid Ounce Cartridge with Nozzle

Unit of Measure

Specifications

Quantity

N/A 1

Weight

N/A 2 lbs

Note

N/A Minimum order is $25

Advantages

Advantages

N/A
  • All weather formula
  • No drip, no sag, easy clean up
  • Fast & Easy dispensing, even 28 ounce cartridge can be hand dispensed
  • Fast curing time, 35 minutes at 60ºF
  • Not mix ratio sensitive
  • NSF 61 approved
  • Rods are easier to insert into the hole with A7 compared with other adhesives
  • Works in damp holes and underwater applications
  • Requires less adhesives - can be used in 1/16" oversized or 1/8" oversized holes
  • One formula for both hollow and solid base materials

Packaging

Packaging

N/A
  1. Disposable, self-contained cartridge system capable of dispensing both components in the proper mixing ratio
  2. Acrylic components dispensed through a static mixing nozzle that thoroughly mixes the material and places the material at the base pre-drilled hole
  3. Cartridge markings: Include manufacturer's name, batch number and best-used-by date, mix ratio by volume, ANSI hazard classification, and appropriate ANSI handling precautions

Specifications

Specifications

N/A Acrylic Adhesive
  1. Two component methyl methacrylate adhesive, non-sag paste, moisture insensitive when cured, dark gray in color
  2. Meets ASTM C881-90, Type IV, Grade 3, Class A, B, and C with the exception of gel time and epoxy content
  3. Shrinkage during cure per ASTM D2566: 0.002 in./in.
  4. Heat deflection temperature, ASTM D648: 140ºF minimum
  5. Shelf life: Best if used within 18 months
  6. Compressive strength, ASTM D695: 10,300 psi minimum
  7. Pumpable at 0ºF without preheating