Catalog Stanley Supply, Inc.

Trubolt® Wedge anchors feature a stainless steel expansion clip, threaded stud body, nut and washer. Anchor bodies are made of plated carbon steel, hot-dipped galvanized carbon steel, type 304 stainless steel or type 316 stainless steel as identified in the drawings or other notations. The exposed end of the anchor is stamped to identify anchor length. Stampings should be preserved during installation for any subsequent embedment verification. Use carbide tipped hammer drill bits made in accordance with ANSI B212.15-1994 to install anchors. Anchors are tested to ACI 355.2 and ICC-ES AC193. Anchors are listed by the following agencies as required by the local building code: ICC-ES, UL, FM, City of Los Angeles, California State Fire Marshal and Caltrans.
Unit of Measure

Specifications

Size

N/A 1/2 x 3-3/4 in

Anchor Diameter

N/A 1/2 in - 13

Overall Length

N/A 3-3/4 in95.3 mm

Price Unit of Measure C = 100 EA = 1

N/A C

Box Qty.

N/A 25

Weight/Box

N/A 5.8 lbs

Wedge Anchor Material

N/A 316 Stainless Steel

Standards and Listings

N/A ASTM E488 criteria and listed by ICC (formerly ICBO) and SBCCI. Anchors are listed by the following agencies as required by the local building code: UL, FM, City of Los Angeles, California State Fire Marshal and Cal Trans.

Note

N/A Minimum order is $25