Catalog Stanley Supply, Inc.
Carbide/Concrete Bits
carbide-concrete-bits
SDS CARBIDE TIPPED ROTARY HAMMER DRILL BITS
(81)- Special Tungsten Carbide Tip.
- Copper Silver Brazing of Carbide Head.
- Special Flute Design Improves Penetration without Blow Back or Compacting.
- ANSI Specification.
- Made in Europe.
- Suitable for:
- Masonry
- Stone
- Brick
- Aggregates
SDS MAX CARBIDE DRILL BITS
(39) SDS MAX carbide-tipped-SDS-Max rotary hammer masonry drill bits feature tips that stay sharper longer and deliver more holes within their ANSI specification than competitors' bits. For the toughest masonry and concrete drilling with long service life. Fits all SDS-Max drive hammers. These hammer drill bits come with either standard cutter heads or X-CUTTER heads. /Asset/SDS MAX X-Cutter Carbide Hammer.jpg SPLINE SHANK ROTARY HAMMER DRILL BITS
(44) Spline Shank rotary Hammer Masonry Drill Bit Fits all spline shank rotary hammers. Patented flute geometry removes dust from the hole quicker for fast drilling and long life. Shot-peened, double-tempered finish reduces breakage. Copper braze materials gives high-heat resistance for reduced tip loss. All tips made to ANSI specifications. /Asset/SPLINE_L.jpg
TAPCON-CONCRETE SCREW DRILL BITS
(16) Each concrete screw carbide drill bit is precisely ground to match a certain tolerance to assure proper hole diameter and to achieve maximum thread holding power. The flat on the shank fits all drill adapters. The drill bit is specially heat treated to make it very durable. /Asset/602TC.jpg SDS-HEX TAPCON CONCRETE SCREW DRILL BITS
(6) SDS-HEX Rotary Hammer drill bits are specifically designed to be used in concrete screw installation. These SDS bits have a special 5/16" HEX shoulder for use with standard concrete Installation sleeves, which eliminate the need for drill adapters. The benefits of using an SDS machine rather than a standard rotation drill means a decrease in operation time of nearly 50%.- ANSI Specification.
- Tungsten Carbide Head.
- Suitable for
- Masonry
- Stone
- Brick
TAPCON-CONCRETE SCREW-Installation Kit and Replacement Parts
(10)- Red Case.
- Black Hardware.
STRAIGHT SHANK-Slow Spiral Pouched Gold Head Masonry Drill Bits
(36)- Tungsten Carbide
- Slow Spiral
- Black Oxide
- Tempered Body for Long Life
- Suitable For:
- Brick
- Cement
- Tile
- Slate
- Cinder Block
STRAIGHT SHANK- Slow Spiral BULK Bulk Gold Head Masonry Drill Bits
(36)- Tungsten Carbide
- Slow Spiral
- Black Oxide
- Tempered Body for Long Life
- Suitable For:
- Brick
- Cement
- Tile
- Slate
- Cinder Block
SDS & STRAIGHT SHANK REBAR CUTTERS
(30) What to do when you encounter rebar:- STOP DRILLING!!! The sound of a rotary hammer or a carbide hammer drill bit hitting steel is much higher than when cutting concrete.
- Remove the drill bit from the hole.
- Mount a rebar cutter of the same diameter as the hole in either a standard 1/2" drill motor, or a 1/2" rotary percussion drill with the selector in the "rotary only" position.
- Insert the rebar cutter into the hole and begin drilling at the suggested RPM speed only. Apply just enough pressure to grind away at the rebar. Do Not Use Excessive Speed or Pressure on the Machine - this will either damage or break the rebar cutter.
- Once rebar is cut through, remove the rebar cutter from the hole and continue drilling with a rotary hammer or carbide hammer drill bit.
