Catalog Stanley Supply, Inc.

Request Information

Hand Dispenser Designed for A7-10 Cartridge
Contractor Quality 26:1 Trust Ratio

Unit of Measure

Specifications | Advantages | Packaging | Specifications

N/A

All weather formula
No drip, no sag, easy clean up
Fast & Easy dispensing, even 28 ounce cartridge can be hand dispensed
Fast curing time, 35 minutes at 60ºF
Not mix ratio sensitive
NSF 61 approved
Rods are easier to insert into the hole with A7 compared with other adhesives
Works in damp holes and underwater applications
Requires less adhesives - can be used in 1/16" oversized or 1/8" oversized holes
One formula for both hollow and solid base materials

N/A

Disposable, self-contained cartridge system capable of dispensing both components in the proper mixing ratio
Acrylic components dispensed through a static mixing nozzle that thoroughly mixes the material and places the material at the base pre-drilled hole
Cartridge markings: Include manufacturer's name, batch number and best-used-by date, mix ratio by volume, ANSI hazard classification, and appropriate ANSI handling precautions

N/A Acrylic Adhesive

Two component methyl methacrylate adhesive, non-sag paste, moisture insensitive when cured, dark gray in color
Meets ASTM C881-90, Type IV, Grade 3, Class A, B, and C with the exception of gel time and epoxy content
Shrinkage during cure per ASTM D2566: 0.002 in./in.
Heat deflection temperature, ASTM D648: 140ºF minimum
Shelf life: Best if used within 18 months
Compressive strength, ASTM D695: 10,300 psi minimum
Pumpable at 0ºF without preheating

Quantity