• All weather formula
• No drip, no sag, easy clean up
• Fast & Easy dispensing, even 28 ounce cartridge can be hand dispensed
• Fast curing time, 35 minutes at 60ºF
• Not mix ratio sensitive
• NSF 61 approved
• Rods are easier to insert into the hole with A7 compared with other adhesives
• Works in damp holes and underwater applications
• Requires less adhesives - can be used in 1/16" oversized or 1/8" oversized holes
• One formula for both hollow and solid base materials

24/Case

1. Two component methyl methacrylate adhesive, non-sag paste, moisture insensitive when cured, dark gray in color
2. Meets ASTM C881-90, Type IV, Grade 3, Class A, B, and C with the exception of gel time and epoxy content
3. Shrinkage during cure per ASTM D2566: 0.002 in./in.
4. Heat deflection temperature, ASTM D648: 140ºF minimum
5. Shelf life: Best if used within 18 months
6. Compressive strength, ASTM D695: 10,300 psi minimum
7. Pumpable at 0ºF without preheating