Print Back
ITW Red Head Tapcon is the "original masonry" anchor that cuts its own threads into concrete, brick, or block. Maximum performance is achieved because the Tapcon Anchor, the Condrive Installation Tool, and the carbide-tipped Tapcon Drill Bits are designed to work as a system. It is essential to use the Condrive tool and the correct drill bit to assure consistent anchor performance.
ITW Red Head HWH Tapcon Climaseal Masonry Anchors
Unit of Measure
Items ITW Red Head HWH Tapcon Climaseal Masonry Anchors
HW3-114
ITW Red Head HW3-114 3/16" x 1-1/4" Tapcon Climaseal Masonry Anchor 100 Per Box
Price Per/Box $18.00
ITW Red Head HWH Tapcon Climaseal Masonry Anchors
HW3-134
ITW Red Head HW3-134 3/16" x 1-3/4" Tapcon Climaseal Masonry Anchor 100 Per Box
Price Per/Box $19.60
ITW Red Head HWH Tapcon Climaseal Masonry Anchors
HW3-214
ITW Red Head HW3-214 3/16" x 2-1/4" Tapcon Climaseal Masonry Anchor 100 Per Box
Price Per/Box $22.00
ITW Red Head HWH Tapcon Climaseal Masonry Anchors
HW3-234
ITW Red Head HW3-234 3/16" x 2-3/4" Tapcon Climaseal Masonry Anchor 100 Per Box
Price Per/Box $24.00
ITW Red Head HWH Tapcon Climaseal Masonry Anchors
HW3-314
ITW Red Head HW3-314 3/16" x 3-1/4 Tapcon Climaseal Masonry Anchor 100 Per Box
Price Per/Box $13.95
Description N/A

Red Head Tapcon ¼” Hex Washer Head Anchor is the "original masonry" anchor that cuts its own threads into concrete, brick, or block. Maximum performance is achieved because the Tapcon Anchor, the Condrive Installation Tool, and the carbide-tipped Tapcon Drill Bits are designed to work as a system. It is essential to use the Condrive tool and the correct drill bit to assure consistent anchor performance. A Phillips Flat Head style is available when flush seating is necessary in countersink applications. The Climaseal Coating is standard on all Tapcon anchors to provide extended corrosion resistance. Advanced thread form cuts into masonry materials for greater stability and pullout values Lengths of Tapcon Anchors range from 1-1/4 inch to 4 inch in 3/16 inch and up to 6 inch 1/4 inch diameters. Nail-Type Point guides the anchor into the pre-drilled hole, so no hole spotting or inserts are required. These anchors install fast and easily (three anchors per minute), and are excellent for wood to concrete applications. Specs: Fixture Thickness - 1-1/4 to 1-3/4 inches; Bit Length - 4-1/2-Inch inches.

N/A

Red Head Tapcon ¼” Hex Washer Head Anchor is the "original masonry" anchor that cuts its own threads into concrete, brick, or block. Maximum performance is achieved because the Tapcon Anchor, the Condrive Installation Tool, and the carbide-tipped Tapcon Drill Bits are designed to work as a system. It is essential to use the Condrive tool and the correct drill bit to assure consistent anchor performance. A Phillips Flat Head style is available when flush seating is necessary in countersink applications. The Climaseal Coating is standard on all Tapcon anchors to provide extended corrosion resistance. Advanced thread form cuts into masonry materials for greater stability and pullout values Lengths of Tapcon Anchors range from 1-1/4 inch to 4 inch in 3/16 inch and up to 6 inch 1/4 inch diameters. Nail-Type Point guides the anchor into the pre-drilled hole, so no hole spotting or inserts are required. These anchors install fast and easily (three anchors per minute), and are excellent for wood to concrete applications. Specs: Fixture Thickness - 1-1/4 to 1-3/4 inches; Bit Length - 4-1/2-Inch inches.

N/A

Red Head Tapcon ¼” Hex Washer Head Anchor is the "original masonry" anchor that cuts its own threads into concrete, brick, or block. Maximum performance is achieved because the Tapcon Anchor, the Condrive Installation Tool, and the carbide-tipped Tapcon Drill Bits are designed to work as a system. It is essential to use the Condrive tool and the correct drill bit to assure consistent anchor performance. A Phillips Flat Head style is available when flush seating is necessary in countersink applications. The Climaseal Coating is standard on all Tapcon anchors to provide extended corrosion resistance. Advanced thread form cuts into masonry materials for greater stability and pullout values Lengths of Tapcon Anchors range from 1-1/4 inch to 4 inch in 3/16 inch and up to 6 inch 1/4 inch diameters. Nail-Type Point guides the anchor into the pre-drilled hole, so no hole spotting or inserts are required. These anchors install fast and easily (three anchors per minute), and are excellent for wood to concrete applications. Specs: Fixture Thickness - 1-1/4 to 1-3/4 inches; Bit Length - 4-1/2-Inch inches.

N/A

Red Head Tapcon ¼” Hex Washer Head Anchor is the "original masonry" anchor that cuts its own threads into concrete, brick, or block. Maximum performance is achieved because the Tapcon Anchor, the Condrive Installation Tool, and the carbide-tipped Tapcon Drill Bits are designed to work as a system. It is essential to use the Condrive tool and the correct drill bit to assure consistent anchor performance. A Phillips Flat Head style is available when flush seating is necessary in countersink applications. The Climaseal Coating is standard on all Tapcon anchors to provide extended corrosion resistance. Advanced thread form cuts into masonry materials for greater stability and pullout values Lengths of Tapcon Anchors range from 1-1/4 inch to 4 inch in 3/16 inch and up to 6 inch 1/4 inch diameters. Nail-Type Point guides the anchor into the pre-drilled hole, so no hole spotting or inserts are required. These anchors install fast and easily (three anchors per minute), and are excellent for wood to concrete applications. Specs: Fixture Thickness - 1-1/4 to 1-3/4 inches; Bit Length - 4-1/2-Inch inches.

N/A Red Head Tapcon ¼” Hex Washer Head Anchor is the "original masonry" anchor that cuts its own threads into concrete, brick, or block. Maximum performance is achieved because the Tapcon Anchor, the Condrive Installation Tool, and the carbide-tipped Tapcon Drill Bits are designed to work as a system. It is essential to use the Condrive tool and the correct drill bit to assure consistent anchor performance. A Phillips Flat Head style is available when flush seating is necessary in countersink applications. The Climaseal Coating is standard on all Tapcon anchors to provide extended corrosion resistance. Advanced thread form cuts into masonry materials for greater stability and pullout values Lengths of Tapcon Anchors range from 1-1/4 inch to 4 inch in 3/16 inch and up to 6 inch 1/4 inch diameters. Nail-Type Point guides the anchor into the pre-drilled hole, so no hole spotting or inserts are required. These anchors install fast and easily (three anchors per minute), and are excellent for wood to concrete applications. Specs: Fixture Thickness - 1-1/4 to 1-3/4 inches; Bit Length - 4-1/2-Inch inches.
Size N/A 3/16 x 1-1/4 in N/A 3/16 x 1-3/4 in N/A 3/16 x 2-1/4 in N/A 3/16 x 2-3/4 in N/A 3/16 x 3-1/4 in
Anchor Diameter N/A 3/16 in
Effective Length N/A 1-1/4 in31.8 mm N/A 1-3/4 in44.5 mm N/A 2-1/4 in57.2 mm N/A 2-3/4 in69.9 mm N/A 3-1/4 in82.6 mm
Price Unit of Measure C = 100 EA = 1 N/A C
Case/Qty N/A 100
Weight/Box N/A 1.1 lbs N/A 1.2 lbs N/A 1.3 lbs N/A 1.6 lbs N/A 1.9 lbs
Material N/A Carbon Steel with Climaseal
Note N/A Minimum order is $25